---
title: BCN3D Stratos | Knowledge base - BCN3D
description: BCN3D Stratos
---

[Ir directamente al contenido](https://support.bcn3d.com/es/knowledge/bcn3d-stratos#main-content)

- [Español](https://support.bcn3d.com/es/knowledge/bcn3d-stratos)
- [Deutsch](https://support.bcn3d.com/de/knowledge/bcn3d-stratos)
- [English](https://support.bcn3d.com/knowledge/bcn3d-stratos)
- [Français](https://support.bcn3d.com/fr/knowledge/bcn3d-stratos)
- [Italiano](https://support.bcn3d.com/it/knowledge/bcn3d-stratos)

Español

Traducciones de Mostrar submenú de

[Contactar con soporte](https://support.bcn3d.com/es/knowledge/kb-tickets/new) [Portal del cliente](https://support.bcn3d.com/repair-service)

![knowledge-base-header-bcn3d-logo.png\]](https://support.bcn3d.com/hs-fs/hubfs/Knowledge%20base/Header/knowledge-base-header-bcn3d-logo.png?height=40&name=knowledge-base-header-bcn3d-logo.png)

- [Default HubSpot Blog](https://blog.bcn3d.com/)

Abrir navegación principal

Cerrar navegación principal

- [Default HubSpot Blog](https://blog.bcn3d.com/)
- - [Español](https://support.bcn3d.com/es/knowledge/bcn3d-stratos)
    - [Deutsch](https://support.bcn3d.com/de/knowledge/bcn3d-stratos)
    - [English](https://support.bcn3d.com/knowledge/bcn3d-stratos)
    - [Français](https://support.bcn3d.com/fr/knowledge/bcn3d-stratos)
    - [Italiano](https://support.bcn3d.com/it/knowledge/bcn3d-stratos)
  
  
  
  
  
  
  Español
  
  Traducciones de Mostrar submenú de
- [Contactar con soporte](https://support.bcn3d.com/es/knowledge/kb-tickets/new)
- [Portal del cliente](https://support.bcn3d.com/repair-service)
- [Foro BCN3D](https://www.bcn3d.com/community/)

[Foro BCN3D](https://www.bcn3d.com/community/)

 Hola. ¿Cómo podemos ayudarte?

- No hay sugerencias porque el campo de búsqueda está vacío.

1. [Knowledge base - BCN3D](https://support.bcn3d.com/es/knowledge)
2. [BCN3D Stratos](https://support.bcn3d.com/es/knowledge/bcn3d-stratos)

# BCN3D Stratos

- [BCN3D Stratos: Modo IDEX](https://support.bcn3d.com/es/knowledge/bcn3d-stratos-idex-mode)
- [Eligiendo la altura de capa - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/layer-height)
- [Configurar la secuencia de impresión para eliminar hilos entre piezas](https://support.bcn3d.com/es/knowledge/bcn3d-sequential-printing-stop-oozing)
- [BCN3D Stratos: Parámetros avanzados](https://support.bcn3d.com/es/knowledge/advanced-settings)
- [Optimizar el material de soporte](https://support.bcn3d.com/es/knowledge/optimize-support-material)
- [Configurar e imprimir correctamente los soportes](https://support.bcn3d.com/es/knowledge/set-print-support-structures)
- [Compensando con la expanción horizontal - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/horizontal-expansion)
- [Definiendo el perímetro - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/shell)
- [La orientación importa](https://support.bcn3d.com/es/knowledge/orientation-matters)
- [Asegurando la adhesión a la superficie de impresión - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/build-plate-adhesion)
- [Laminar con BCN3D Stratos](https://support.bcn3d.com/es/knowledge/slice-bcn3d-stratos)
- [Refrigerando la impresión - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/cooling)
- [Perfeccionar los soportes](https://support.bcn3d.com/es/knowledge/improve-supports)
- [Comprendiendo las retracciones - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/retraction)
- [Agregar nuevos materiales de impresión 3D](https://support.bcn3d.com/es/knowledge/custom-material)
- [Cómo incrementar la flexibilidad de tus piezas](https://support.bcn3d.com/es/knowledge/stretch-flexibility-parts)
- [Generando los soportes - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/supports)
- [Elegir el material de soporte](https://support.bcn3d.com/es/knowledge/support-material)
- [Definiendo los desplazamientos - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/travel)
- [Cómo configurar una torre de temperatura con BCN3D Stratos](https://support.bcn3d.com/es/knowledge/setting-up-temperature-tower-stratos)
- [Introducción a BCN3D Stratos](https://support.bcn3d.com/es/knowledge/bcn3d-stratos-introduction)
- [Cómo minimizar el gasto de material mediante pasos graduales](https://support.bcn3d.com/es/knowledge/optimize-material-gradual-steps)
- [Optimizar la superficie de impresión](https://support.bcn3d.com/es/knowledge/optimize-printing-surface)
- [Crear nuevos perfiles de impresión](https://support.bcn3d.com/es/knowledge/create-new-material-profiles)
- [BCN3D Stratos: Parámetros básicos](https://support.bcn3d.com/es/knowledge/basic-parameters)
- [Entendiendo el relleno - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/infill)
- [Ajustar la temperatura - BCN3D Stratos](https://support.bcn3d.com/es/knowledge/temperature)
- [Como mejorar la calidad superficial de los voladizos](https://support.bcn3d.com/es/knowledge/improve-overhangs)
- [¿Cómo actualizar BCN3D Stratos?](https://support.bcn3d.com/es/knowledge/actualizar-bcn3d-stratos)
- [Cómo evitar que el relleno se marque en la superficie de tus piezas](https://support.bcn3d.com/es/knowledge/avoid-infill-marks)

Ver menos ▼

- [Omega](https://support.bcn3d.com/es/knowledge/omega)
- [Epsilon Series](https://support.bcn3d.com/es/knowledge/epsilon-series#main-content)
  
  
  
  
  
    - [Manuales y Descargas](https://support.bcn3d.com/es/knowledge/epsilon-series#manuales-y-descargas)
    - [Primeros pasos](https://support.bcn3d.com/es/knowledge/epsilon-series#primeros-pasos)
    - [Mantenimiento](https://support.bcn3d.com/es/knowledge/epsilon-series#mantenimiento)
    - [Consejos](https://support.bcn3d.com/es/knowledge/epsilon-series#consejos)
    - [Resolución de problemas](https://support.bcn3d.com/es/knowledge/epsilon-series#resolución-de-problemas)
- [Sigma Series](https://support.bcn3d.com/es/knowledge/sigma-series#main-content)
  
  
  
  
  
    - [Manuales y descargas](https://support.bcn3d.com/es/knowledge/sigma-series#manuales-y-descargas)
    - [Primeros pasos](https://support.bcn3d.com/es/knowledge/sigma-series#primeros-pasos)
    - [Mantenimiento](https://support.bcn3d.com/es/knowledge/sigma-series#mantenimiento)
    - [Consejos](https://support.bcn3d.com/es/knowledge/sigma-series#consejos)
    - [Troubleshooting](https://support.bcn3d.com/es/knowledge/sigma-series#troubleshooting)
- [Smart Cabinet](https://support.bcn3d.com/es/knowledge/smart-cabinet#main-content)
  
  
  
  
  
    - [Manuales y Descargas](https://support.bcn3d.com/es/knowledge/smart-cabinet#manuales-y-descargas)
    - [Primeros pasos](https://support.bcn3d.com/es/knowledge/smart-cabinet#primeros-pasos)
    - [Mantenimiento](https://support.bcn3d.com/es/knowledge/smart-cabinet#mantenimiento)
    - [Resolución de problemas](https://support.bcn3d.com/es/knowledge/smart-cabinet#resolución-de-problemas)
- [Filamentos](https://support.bcn3d.com/es/knowledge/filamentos#main-content)
  
  
  
  
  
    - [Consejos](https://support.bcn3d.com/es/knowledge/filamentos#consejos)
    - [PLA](https://support.bcn3d.com/es/knowledge/filamentos#pla)
    - [Tough PLA](https://support.bcn3d.com/es/knowledge/filamentos#tough-pla)
    - [TPU](https://support.bcn3d.com/es/knowledge/filamentos#tpu)
    - [PET-G](https://support.bcn3d.com/es/knowledge/filamentos#pet-g)
    - [BVOH](https://support.bcn3d.com/es/knowledge/filamentos#bvoh)
    - [PVA](https://support.bcn3d.com/es/knowledge/filamentos#pva)
    - [ABS](https://support.bcn3d.com/es/knowledge/filamentos#abs)
    - [PP](https://support.bcn3d.com/es/knowledge/filamentos#pp)
    - [PA](https://support.bcn3d.com/es/knowledge/filamentos#pa)
    - [PAHT CF15](https://support.bcn3d.com/es/knowledge/filamentos#paht-cf15)
    - [PP GF30](https://support.bcn3d.com/es/knowledge/filamentos#pp-gf30)
    - [PET CF15](https://support.bcn3d.com/es/knowledge/filamentos#pet-cf15)
    - [Metal Pack](https://support.bcn3d.com/es/knowledge/filamentos#metal-pack)
- [BCN3D Stratos](https://support.bcn3d.com/es/knowledge/bcn3d-stratos)
- [BCN3D Cloud](https://support.bcn3d.com/es/knowledge/bcn3d-cloud#main-content)
  
  
  
  
  
    - [BCN3D Cloud Teams](https://support.bcn3d.com/es/knowledge/bcn3d-cloud#bcn3d-cloud-teams)
- [Sigma + Sigmax](https://support.bcn3d.com/es/knowledge/sigma-sigmax#main-content)
  
  
  
  
  
    - [Manuales y descargas](https://support.bcn3d.com/es/knowledge/sigma-sigmax#manuales-y-descargas)
    - [Primeros pasos](https://support.bcn3d.com/es/knowledge/sigma-sigmax#primeros-pasos)
    - [Mantenimiento](https://support.bcn3d.com/es/knowledge/sigma-sigmax#mantenimiento)
    - [Consejos](https://support.bcn3d.com/es/knowledge/sigma-sigmax#consejos)
    - [Solución de problemas](https://support.bcn3d.com/es/knowledge/sigma-sigmax#solución-de-problemas)
- [Consejos](https://support.bcn3d.com/es/knowledge/consejos#main-content)
  
  
  
  
  
    - [Diseño 3D](https://support.bcn3d.com/es/knowledge/consejos#diseño-3d)
    - [impresora 3D](https://support.bcn3d.com/es/knowledge/consejos#impresora-3d)

- [Default HubSpot Blog](https://blog.bcn3d.com/)

[![Chill listening crop-3](https://support.bcn3d.com/hs-fs/hubfs/Logo_200px_horizontal_negro.png?width=100&height=40&name=Logo_200px_horizontal_negro.png "Chill listening crop-3")](https://support.bcn3d.com/knowledge)

Knowledge base

Copyright © 2026, BCN3D Headquarters