Skip to content
English
Contact support Customer portal
BCN3D forum
  • There are no suggestions because the search field is empty.

BCN3D Omega I60 1.7.2 Firmware update

Changelog_1.7.1_Omega_I60

WARNING!

Please carefully read this information.

New implementations have been introduced in version 1.7.2. To update your printer to the latest version, make sure you are using the following versions:

Embedded: v1.7.2
Peripherals: v2.8.1
MOS: v0.4.4
Feeder: v1.0.0

Please update the firmware version of your Omega I60 printer by following the steps outlined in this video:

Download the update files from the following links:

Firmware embedded: 1.7.2.swu2

OMEGA CHANGELOG V1.7.2:

  • Camera Integration with BCN3D Cloud 2.0
Your printer's camera is now automatically connected to BCN3D Cloud 2.0, enabling remote monitoring directly from your Cloud account. Check the progress of ongoing prints or verify whether the build plate is empty, anytime and from anywhere.
  • AI-Powered Spaghetti Detection
Printers connected to BCN3D Cloud 2.0 can now automatically detect spaghetti failures during printing. 
 
When a failure is detected, you can configure the system to automatically pause the print, send an email or push notification, or both. This feature is available for STANDARD plans and above and can be configured from the AI Tool section of your BCN3D Cloud 2.0 account.
  • Improved Connectivity with BCN3D Cloud 2.0
Enhanced connection stability and status synchronisation between your printer and BCN3D Cloud 2.0, ensuring more reliable communication and accurate printer status reporting. This update resolves issues where the Cloud could incorrectly display the printer as Busy or Offline when its actual status was different.

This update will be exclusively beneficial for customers who have their printer registered with Cloud. If you haven’t registered your printer yet, this is a good time to do so. You can find more information About BCN3D Cloud 2.0 in this article.