First steps
      Back to home
      1. Knowledge base - BCN3D
      2. Epsilon Series
      3. First steps

      How to Install the Printing Surface (Epsilon Series)

      Before you Start Printing, you Will Need to Install the Printing Surface

       

                

      EN

      DE

      IT

      ES

      FR

       

      Find your Model

      Select the model of your printer by clicking on the corresponding button according to the last 4 digits of the serial number.

      If you can't find the serial number, click on the following article:

      Where is the serial number?

        serial-number-epsilon-w50-w27-transparent-v3
      Epsilon W50
      button-serial-number-before-w50 button-serial-number-after-w50
      Epsilon W27
      button-serial-number-before-w27 button-serial-number-after-w27
       

       

      Epsilon Series Build Plate Installation

      W50 before 0771 | W27 before 0498

       

      Epsilon Series Build Plate Installation

      W50 before 0771 | W27 before 0498

       

      Forum community 

      Need more tips? Check out our forum community for more info.

       

      It's important to keep your printer in good shape to make the most out of it. In this chart you can find a list of the extruder maintenance procedures and how frequently these should be done. Maintenance Plan.

       

      bcn3d-recycle  Take your e-waste to a certified recycler. Check how we do it in BCN3D.

       

      RELATED ARTICLES
      calibrate printing surface eng

       

      		 first setup epsilon series eng

       

      You can help improve the BCN3D Knowledge Base.

      If you feel there are guides that we are missing or you found any error, please use this form to report it. Report form :)