How to print with BCN3D PET-G

What is PET-G

PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterized by a good balance of tensile strength and elongation at break.

Its high resistance to water and chemicals makes it the material of choice for water-tight containers and protective cases.

PET-G is a versatile technical material, as easy to print as PLA, but with an improved balance of mechanical, chemical, and thermal properties.

You can purchase PET-G from our store: BCN3D PET-G

Properties of BCN3D PET-G

Functional prototypes and mechanical parts
Waterproof applications
Structural parts subject to mild stress
Snap-fit joints
Commonly used in beverage bottles

PET-G compatibility with BCN3D printers / hotends

✔	✔	✔	✔	✔

0.4 / 0.6 / 0.8 / 1	0.4 / 0.6 / 0.8 / 1	0.4 /0.8	0.4 / 0.6 / 0.8 / 1	0.4 / 0.6 / 0.8 / 1

Supported material combinations

The BCN3D PET-G is compatible with the following BCN3D Filaments.

Standard materials

PLA

TPU

PVA

BVOH

TPLA

PET-G ✔

Technical materials

ABS

PA ✗

PP ✗

Composite materials

PAHT CF15 ✗

PP GF30 ✗

PET CF15 ✔

316L ✗

17-4 PH ✗

PET-G printing settings - 0.4 mm nozzle

Extruder temperature	230ºC-250ºC
Extruder temperature	230ºC-250ºC
Build plate temperature	60ºC Full enclosure models 80ºC Open models
Build plate temperature	60ºC Full enclosure models 80ºC Open models
Speed	30 mm/s Full enclosure models 45 mm/s Open models
Retraction speed	40 mm/s Full enclosure models 60 mm/s Open models
Retraction distance	6.5 mm Full enclosure models 5 mm Open models
Cooling fan	90%
Minimum layer height	0.15-0.4 mm

Note: BCN3D Lab develops specific configurations for each material and printer. Be sure to use the last BCN3D Stratos version.

Build plate adhesion

Apply a fine and even layer of Magigoo glue to achieve the desired adhesion between the 3D printed part and the printing surface of your 3D printer in order to keep the part fixed.

It is best to apply Magigoo when the printing bed is cool.