How to print with Ultrafuse 17-4 PH

What is 17-4PH?

how-print-17-4-ph-ultrafuse-bcn3d-printers

Ultrafuse 17-4 PH is a filament of hardened stainless steel composite with chromium-copper martensitic precipitation. It's magnetic and fully heat treatable to get high levels of strength and hardness, maintaining its mechanical and corrosion resistance at temperatures up to 315°C.

Parts printed with Ultrafuse 17-4 PH filament obtain their final full metal properties via a debinding and sintering process.

This material can be used to print tooling, functional prototypes, jigs, and fixtures and is suitable for serial production to functional prototypes. 17-4 PH parts are ideal for the Petrochemical, Aerospace, Automotive, and Medical industries.

To use 17-4 PH filament you will have to install the Hotend M. Printing Ultrafuse 316L and 17-4 PH with a standard nozzle will seriously damage the hotend.

You can purchase 17-4 PH from our online store: Ultrafuse 17-4 PH.

17-4 PH compatibility with BCN3D printers / hotends:

✔	✔	✗	✗	✗

Hotend M	Hotend M

Supported materials combinations

The Ultrafuse 17-4 PH is not compatible with the current BCN3D Filaments.

Standard materials

PLA ✗

TPU ✗

PVA ✗

BVOH ✗

TPLA ✗

PET-G ✗

Technical materials

ABS ✗

PA ✗

PP ✗

Composite materials

PAHT CF15 ✗

PP GF30 ✗

PET CF15 ✗

316L ✗

17-4 PH ✔

17-4 PH printing settings - Hotend M:

Extruder temperature	245ºC
Build plate temperature	105ºC
Printing speed	30 - 60 mm/s
Retraction speed	25 mm/s
Retraction distance	6.5 mm
Cooling fan	0%
Minimum layer height	0.15 mm

Note: BCN3D Lab develops specific configurations for each material and printer. Make sure to use the last BCN3D Stratos version.

Build plate adhesion

Clean the glass before printing and apply a fine and even layer of Magigoo Pro Metal glue to achieve good adhesion between the 3D printed part and the printing surface of your 3D printer in order to keep the part fixed.

It is best to apply Magigoo when the printing bed is cool.

Use the Mesh Mapping to ensure that the model is properly attached to the build plate, to get the best result on the debinding and sintering process.

Recommendations

This filament doesn't absorb humidity from the air. However if the material is not in use for extended periods of time, it is recommended to keep the 17-4 PH spools in a box or airtight container.

17-4 PH emits low levels of fumes and particles when printed. We recommend printing it in a well-ventilated area to ensure a healthy environment.

Clean the nozzle before and after each print job to ensure a good extrusion and get cleaner prints.

Digital documentation of the 17-4PH

Here you can find and download the Technical data and the Safety data sheets of our 17-4PH:

Technical data sheet

Safety data sheet

Send us your comments about this article
RELATED ARTICLES