![knowledge-base-header-bcn3d-logo.png]](https://support.bcn3d.com/hs-fs/hubfs/Knowledge%20base/Header/knowledge-base-header-bcn3d-logo.png?height=40&name=knowledge-base-header-bcn3d-logo.png){kind=logo}
Tips
- The meaning of life!
- How to unclog a hotend
- How to get cleaner results in dual-extrusion prints
- How to solve print quality issues
- How to fix Underextrusion
- How to fix misaligned dual prints
- Underextrusion issues in the first layers
- How to fix Layer Shifting
- How to fix Ghosting/Ringing
- How to fix Stringing/Oozing
- How to fix filament grinding
- Tips to correctly adhere the print
- How to safely remove prints
- How to speed up your prints
- Post-processing 3D printed parts
- Open Source files
- BCN3D Sample Parts
- How to install the new printing platform thumbscrews
- How BCN3D recycles the e-waste
- Magigoo: tips and tricks
- Progen (BCN3D profile generator)
- Simplify 3D
- BCN3D Cura User Manual
- How to enable the Technical Service Mode
- Prevent filament grinding on parts with a lot of retractions
- Technical Service Mode: XY Hole Coordinates
- 3D Printing Glossary (BCN3D Edition)
Design 3D
3D printer
- Learning your printer
- Calibration
- Maintenance
- How to choose the correct hotend
- The proper working environment for your 3D printer
- User guides
- Quick start guides
- Warranties
- Frequently asked questions
- How to activate your printer
- Maintenance messages
- How to change the Colibri board?
- How to register & unregister the printer
- Where is the serial number?
- How to check and change the USB from the mainboard to the Colibri board
- How to update the firmware (Epsilon Series / Sigma Series)
- Mesh Mapping: Fade Option
- How to replace the driver spacer
- BCN3D Belt tensioner
- Mesh Mapping: Build Plate Orientation
- How to remove the clamps from the belts.
- Installing Shims
- How to change the cable of the hotend
- BCN3D Hotends: Materials, compatibility and installation