First Setup (Epsilon Series)

Setting up your Printer for the First Use

 

                                                                                                                              

EN

DE

IT

ES

FR


 

Find your model

Select the model of your printer by clicking on the corresponding button according to the last 4 digits of the serial number.

If you can't find the serial number, click on the following article:

Where is the serial number?

  serial-number-epsilon-w50-w27-transparent-v3
Epsilon W50
button-serial-number-before-w50 button-serial-number-after-w50
Epsilon W27
button-serial-number-before-w27 button-serial-number-after-w27
 

 

Epsilon Series First Set Up

W50 before 0771 | W27 before 0498

After unboxing your Epsilon, the video below will guide you through the steps needed to set up your printer for its first use.

Chapters included on this guide:

- Printing surface installation

- Choose the language

- Network connection / BCN3D Cloud

- Register the Epsilon

- Load the filament

- Printer calibration

 


Epsilon Series First Set Up

W50 after 0771 | W27 after 0498

After unboxing your Epsilon, the video below will guide you through the steps needed to set up your printer for its first use.

Chapters included on this guide:

- Printing surface installation

- Choose the language

- Network connection / BCN3D Cloud

- Register the Epsilon

- Load the filament

- Printer calibration

 

Forum community 

Need more tips? Check out our forum community for more info.

 

It's important to keep your printer in good shape to make the most out of it. In this chart you can find a list of the extruder maintenance procedures and how frequently these should be done. Maintenance Plan.

 

bcn3d-recycle  Take your e-waste to a certified recycler. Check how we do it in BCN3D.


RELATED ARTICLES

quick start guide epsilon series eng

 

unboxing epsilon eng

 

You can help improve the BCN3D Knowledge Base.

If you feel there are guides that we are missing or you found any error, please use this form to report it. Report form :)