In this article you will learn how to check if the extruder motors are in good condition.
To check if the bondtech extruders are working correctly, follow the steps explained in this video:
If the bondtech isn’t moving correctly, the problem could be coming from the motor, the E driver, or a bad flat cable connection. To test these options, check the following articles:
- Article: Change the Bondtech driver
- Article Change the bondtech extruders
- Article: Clean the Bondtech extruders
- Article: Check flat cable connections
If the bondtech extruder is moving correctly but you can not unload the filament, check these articles:
Article: How to manually unload filament
Forum community
This article doesn't fix your issue? Check out our forum community for more info about this.
It's important to keep your printer in good shape to make the most out of it. In this chart you can find a list of the extruder maintenance procedures and how frequently these should be done. Maintenance Plan
Take your e-waste to a certified recycler. Check how we do it in BCN3D.
|
You can help improve the BCN3D Knowledge Base. If you feel there are guides that we are missing or you found any error, please use this form to report it. Report form :) |