How to clean the hotend (BCN3D Epsilon)

Follow the steps described on the next video to clean the hotends.

 

Be careful when pulling the filament from the hotend to prevent any possible damage to the printing head

 

Note: It is recommended to clean the hotend periodically and, especially, every time you switch materials. Ideally, use a piece of nylon filament to perform this operation.

bcn3d-clean-nozzle

Don't forget to keep clean the tip of the nozzle to prevent model imperfections and material mixing.

You can heat the hotend and use a piece of paper to remove the fused material remains.