Tips
      Back to home
      1. Knowledge base - BCN3D
      2. Filaments
      3. Tips

      Material combination

       

                                                                

      EN

      ES
       
       
      combination of materials for 3d printing
       
      The compatibility between materials is very important when printing with both heads and different materials. This is necessary to make sure both materials have good adhesion between them and to simplify the printing process.
       
      For this reason, we have created the following table with the combinations of the materials available at BCN3D:
       
       

      table of compatible materials to be combined in 3d printing

      Click the image to enlarge it.

       

      Forum community 

      Need more tips? Check out our forum community for help.

       

      It's important to keep your printer in good shape to make the most out of it. In this chart, you can find a list of the extruder maintenance procedures and how frequently these should be done. 

      Maintenance Plan (Epsilon Series)

      Maintenance Plan (Sigma Series)

      Maintenance Plan (BCN3D Sigmax)

      Maintenance Plan (BCN3D Sigma)

       

      bcn3d-recycle  Take your e-waste to a certified recycler. Check how we do it in BCN3D.

       

      RELATED ARTICLES
      3D printing materials store filament eng

       

      You can help improve the BCN3D Knowledge Base.

      If you feel there are guides that we are missing or you found any error, please use this form to report it. Report form :)