![knowledge-base-header-bcn3d-logo.png]](https://support.bcn3d.com/hs-fs/hubfs/Knowledge%20base/Header/knowledge-base-header-bcn3d-logo.png?height=40&name=knowledge-base-header-bcn3d-logo.png){kind=logo}
3D printer
- Learning your printer
- Calibration
- Maintenance
- How to choose the correct hotend
- The proper working environment for your 3D printer
- User guides
- Quick start guides
- Warranties
- Frequently asked questions
- How to activate your printer
- Maintenance messages
- How to change the Colibri board?
- How to register & unregister the printer
- Where is the serial number?
- How to check and change the USB from the mainboard to the Colibri board
- How to update the firmware (Epsilon Series / Sigma Series)
- How to replace the driver spacer
- Mesh Mapping: Fade Option
- BCN3D Belt tensioner
- Mesh Mapping: Build Plate Orientation
- How to remove the clamps from the belts.
- Installing Shims
- How to change the cable of the hotend
- BCN3D Hotends: Materials, compatibility and installation