BCN3D Stratos

• How to update BCN3D Stratos?
• How to configure a temperature tower in BCN3D Stratos
• How to Prevent Infill Marks on the Surface of your Pieces
• Slice with BCN3D Stratos
• BCN3D Stratos Introduction
• BCN3D Stratos: IDEX mode
• Orientation Matters
• Add New 3D Printing Material
• BCN3D Stratos: Basic Parameters
• Setting the Temperature - BCN3D Stratos
• Defining the Shell - BCN3D Stratos
• Understanding the Infill - BCN3D Stratos
• Keeping the Print Cool - BCN3D Stratos
• Defining the Travels - BCN3D Stratos
• Securing the Build Plate Adhesion - BCN3D Stratos
• Generating the Supports - BCN3D Stratos
• BCN3D Stratos: Advanced parameters
• Choosing the Layer Height - BCN3D Stratos
• Understanding Retractions - BCN3D Stratos
• Compensating with horizontal expansion - BCN3D Stratos
• How to create new material profiles
• How to optimize the printing surface
• Improving the supports
• Optimizing the Support Material
• How to minimize Material Waste using Gradual Steps
• How to choose the Support Material
• How to Properly Configure and Print the Supports
• How to stretch the flexibility of your parts even further
• Sequential printing puts a stop to oozing between pieces
• How to improve the surface quality of overhangs